jual mesin Reball chipset notebook, bga rework station, ir6000, ir9000, HT-R392, HT-T300, Chinafix CF260, Chinafix cf360 chip, capasitor, ic, spare part notebook, services mainboard laptop

 

Intelligent Mute Integration Connection Design

July  2012, CF360 upgraded overall !
Upgrade new holder, 2 crosswise holders, slide freely
Upgrade self-adaption thimble
Upgrade bottom nozzles, laser cutting air-out mesh, air-out uniformlier

        Intelligent Mute    Integration Connection Design

CF360 parameter
    Main Power:4000W
    Upper heating power: 800W
    Bottom heating power: 800W
    Power supply:　AC220V±0.1  50/60Hz
    Overall dimension: 760mm(L)*700mm(W)*600mm(H)
    Location mode:  PCB holder can be adusted to X/Y direction at will , clip slot of V font ,   crocodile clip, hook of V font.
    Temperature Control: Closed-Cycle control with K Sensor, independent temperature  control, precision:±1.
    PCB Size: W50*D50mm~ w440mm*D310mm
    Suitable Chip Size: 2*2mm-46*46mm
    Upper Nozzle Size: 28mm*28mm，35mm*35mm，38mm*38mm ，43mm*43mm ，   46mm*46mm
    Bottom Nozzle Size: 34mm*34mm，45mm*45mm
    Manner of Working: Drive
    Machine Weight: 36KG

CF360 characteristic:
1, The hot-air part adopts exported long-life heating coil, through special insulation heating treatment, heating uniformlier, long-life to use well.
2, The design of three warm area support, can fine adjust to support height, avoid welding-area to sink.
3. The upper hot air-flow can be adjusted,  use different air-flow to different chips, it's not easy to make expand.
4, Upper and bottom hot-air control temperature separately, it can store 10 items with 16 stages temperature curve setting-up. We can also provide 10 groups of common heating curve.
5, Overtemperature protection function,over the temperature, heating coil automatic power off.
6, Intelligent mute function, keep mute under non-working condition.
7, New type design of air outlet with mixed wind, air-out temperature uniformilier.
8, Machincal part adopts oxidation treatment, main machine box use thicken material, prevent shapeless at whole hog.
9, Upper heating part continue to use high-grade products' design of move by X/Y shaft, treating all kinds of shapeless chips easiler.
10, Three warm areas can be controlled separated, to achieve the function of soldering and dry.
11, Complete machine construction adopts the only design of dismounting easily, exchange electric parts simply and conveniently, warranty with fast speed, machine's rate of utilization reaches the highest.
12, Allocate vacuum attaching-pen, take down chips easily.

What's Mute Design?
     Under the stage of non-curve working, the machine will close upper and bottom fans' work. Before starting heating, fans start working firsrly; after stoping heating, fans stop working later. Reduce noise, reduce the times of switching machine by user, extend machine life.

     Three warm areas'  temperature-controlled instrument can achieve seperated temperature-control. Upper and bottom warm areas can store 10 items with 8 stages temperature curve setting-up. Closed-Cycle control with K Sensor, independent temperature control, precision:±1. Three warm areas can be controlled separated, to achieve the function of soldering and dry. Each warm area can achieve the function of keep during heating, strenghen  manual intervention, increase success rate of welding.

      Autosplice control pannel, control all the action with intelligent meauring ability in strict accordance with sequential working, protecting heating core, integration & connection design.

     Standard configuration: 8 PCB holder,( 4 holders with hook, 4 holders with alligator clip), combine with fixture table, can position at any point on 360° plane, can clip all kinds of shapeless PCB board flexibly. Consumers can choose and match as personal need.

   The design of inner notch can ensure to clip PCB and mounting hole of nobebook-board firmly, make PCB not easily to be shapeless when heating.

Extra Strength upper heating support, removes more flexible.

    All the 5 single acmes of bottom nozzle can be fine adjusted the height to adapt different models' PCB. Two-sided PCB or PCB with elements, fine adjustment can realize the stress support to PCB uniformly. avoiding PCB to sink or shapeless and increasing the success rate of welding.
    The bottom heating zone can be highly fine adjusted by screw handle on the sides of machine, turn the handle, bottom heating zone can be up and down, it all can be adjusted before clamping PCB or during welding. Based on our lots of welding experience, at curve's third and fourth heating zone, PCB can come into being heavy shapeless easily. Especially to the PCB non-roast, it will produce more stress after heating, it need to fine adjust handle during welding to support PCB more smoothly and ensure the success rate of welding.
 Preheating zone can work separately to roast and stoving, besides, it also can be zone controlled and ensure heating square according to PCB size and installation site.
The design of double spotlight, can ensure to observe chips' welding situation on all sides
   Preheating zone can work separately to roast and stoving, besides, it also can be zone controlled and ensure heating square according to PCB size and installation site.
The design of double spotlight, can ensure to observe chips' welding situation on all sides.

    Chinafix original-created and classical design of repeated air outlet with mixed air, makes air-out temperature uniforlier.

The meshes of air-out net change from being minor to being major, the anti-explosion on the central position of nozzle.
Vacuum attaching-pen, automatic start after ending curve, strong suction, can attach all kinds of BGA chips easily
Vacuum attaching-pen, automatic start after ending curve, strong suction, can attach all kinds of BGA chips easily.

Packing by thick plywooded box, the interior is filled with antishock foam, and fasten by wood sticks.
Packaging Size: 70cm(L)*70cm(W)*50cm(H)

Accessory:
1, upper nozzle: 28*28mm,34*34mm,38*38mm,42*42mm, 46*46mm
2, bottom nozzle: 34*34mm, 45mm*45mm
3, imported temperature measuring wire with "K“ galvanic couple
4, holder: 8 pcs
Packaging:
Standard wooden box, size: 60*60*45cm, interior is filled with antishock foam to make goods safe during transportation. Due to the goods is too heavy